1.This machine works on the technology of the electric synchronous control. The welding process and the welding time are controlled by digital integrated circuitry. The welding process runs stably and with high accuracy. Welded joints have a small contact patch, are free from defects and have high strength. 2.The machine pulls the longitudinal and transverse wire segments from the coil wire. 3.This equipment is equipped with a special device for cutting wire (the device is protected by the state patent ZL2208722.2), and a system to determine the position of the cells (patent AL02208721.4) thus, the distance between the mesh elements are equal and constant, which is necessary for cutting of product. 4.The machine has a system of pulling the mesh, which cuts the wire mesh elements under the action of mechanical load (the system is protected by the state patent ZL200520024380.9) and the positioning device grid. This allows you to control the openings of the wire loops and the open part of the grid more carefully, and more accurately carry out the operation of welding. Item Model LM-189 Wire diameter 1.8-3.5 mm Feed longitudinal wire Continuous wire Cross-wire Discrete wire The cell 50*50-200*200mm Power 380V 50Hz Capacity 189 kVA The number of electrodes 24 Width of mesh 1200mm Mac. speed 45родов/min Weight 3.2 T Dimensions 1.8*2.5*1.8 m