announcements: This model is the most popular on the market. The performance of the dryer Mecmar CPT-7/61 Product Corn Air temperature (°C)120 Capacity**** (m3) 10 Capacity (t)7.5 Evaporation capacity** (%/h)4.5 The initial moisture content (%) 25 Final humidity (%) 14 Hourly production*** (t/h) 2 Daily productivity ***(t/24h)45 MECMAR dryers are the difference is: - Fuel consumption reduction of 1% moisture (dryer MECMAR consume 1 liter of fuel). - The longer the combustion chamber (allows the flame to give maximum power, with no contact with the dried product, which is important for drying direct heating. - Gear transmission on the auger and agitator in contrast to belt drives can withstand the maximum load and serves for many years. - The presence of a set of radar protection of the heating chamber (prevents drying of the product in the heating chamber). - The presence of a Central screw with a double winding and variable pitch (provides long lasting, traumatic for the product) Options: - Possibility of installation of aspiration system (optional, allows you to remove light impurities from the drying of the product during drying). - Possibility of installation of the roof to protect from rain (optional, protects from influence of an atmospheric precipitation, thus increasing the efficiency of the aspiration system). - Ability to set real-time control system (optional, follows the mechanism of agitators and in case of an emergency stop turns off the burner and takes a light signal of an emergency stop via the tracker, in the geared power transmission is a necessity in this option minimized, but can be installed as an additional system security). - Possibility of installation of an automatic lubrication system (optional, provides in automatic mode, the flow of grease through special channels to the required nodes). - Possibility of installation of the hydrometer (optional, allows you to monitor the humidity of the dried product through a built-in moisture indicator).